Installing a trolley crane

8-May, 2020
1 150 296 Ko‘rishlar soni

Installing an overhead hoist inside a garage.

Fikrlar
  • the music at the end ?

    Steve HopesSteve Hopes7 soat oldin
  • watching this while listening to ( Kool & The Gang - Get Down On It ) suits the whole process perfectly Lol

    Steve HopesSteve Hopes7 soat oldin
  • You definitely need to upgrade to an electric motor driven hoist. X and Y axis and wireless controller.

    john Evangeloujohn EvangelouKun oldin
  • Put a stop bolt or carabiner on the tail end of your hoist chain so it can't "accidentally" come off the spool. Murphy's law you know LOL. Good job!

    PatrickPatrick2 kun oldin
  • You made a rookie mistake or you didn’t have a torch big enough to cut the plate. You had to weld blocks back in instead of cutting out the shape of the beam¿

    Justin LandrumJustin Landrum3 kun oldin
    • I can cut it however I want. That's how I wanted to do it.

      Andrew CamarataAndrew Camarata3 kun oldin
  • sir...can i know the model of the portable steel cutter that you used???

    Prima Energy Services Sdn BhdPrima Energy Services Sdn Bhd6 kun oldin
  • Andrew! Greetings from the UK mate. You have got some serious equipment and tools there at your place , that's a fact.

    Alan BradburyAlan Bradbury6 kun oldin
  • What brand is that drill press

    Charles JenningsCharles Jennings6 kun oldin
  • Safety first ? :)

    Ko OKo O7 kun oldin
  • "I don't have two people." I felt that.

    ATMATM8 kun oldin
  • Maybe cutting a T slot into the inch plate would have been better than the cutout and filler. Just slides on and you have less welds and cuts to do

    [Whatever name goes here][Whatever name goes here]9 kun oldin
  • WHATS YOUR FAVRITE CUTTING OIL FOR THOUS ANULER CUTTERS? AND HAVE YOU TRYED THE WAX TUBE STUFF....

    KungFuGripDave Local80GripKungFuGripDave Local80Grip9 kun oldin
  • Am just happpy the castle adress is 2014 and not 2020 :)

    Thomas DobrenickThomas Dobrenick9 kun oldin
  • Using an electric hoist on the top in the middle of the main bar in combination with pulleys easily you can move the bar in front and back! Really i like your try and your project!

    telosfdtelosfd10 kun oldin
  • good job bro..

    BILL NGOBILL NGO12 kun oldin
  • who are you? really a super guy 👍good luck

    bas farbas far12 kun oldin
  • Ok you sold me on the saw, cutting thru that I beam.

    J GJ G13 kun oldin
  • When is the book coming out? I'd buy it! A book called - "WHY? and HOW TO BUILD YOU OWN CASTLE HOME. BECAUSE THEY WANTED TOO MUCH and I COULD BUILD IT CHEAPER MYSELF!" - By Andrew Camarata Now tht be a book worth buying, along with a time laspe video of course.

    Jerry StotlerJerry Stotler14 kun oldin
  • Cody needs a hard hat too if he is under the beam!

    climatixseucheclimatixseuche14 kun oldin
  • I think it would be a good idea to add a piece of steel to the end of the piece that moves ..that wraps around the edge of the stationary piece so that if the trollies fail it doesnt just fall but locks in place till you replace the chinese trollies. Just a safety is all.

    72chargerse7272chargerse7214 kun oldin
  • Use a torch to cut the i beam it is so much faster

    Matthew WilliamsMatthew Williams15 kun oldin
  • I like what you did to your building. Nice living quarters. Crash there when you get to tired.

    David ZamoraDavid Zamora15 kun oldin
  • seems overkill you have all the tools to do it the same. There isnt a man on earth who wouldnt want a over crane trolly thingy. I cant believe how you cut thru that thick ass plate. Again with the plasma cutter. A trolly is any sheet metal or metal fabs dream.5000lbs

    Money BagsMoney Bags16 kun oldin
  • Andrew: “ so I needed a interplanetary space shuttle but they are to expensive to buy so I’m just gonna build one “

    SingleTrackRiderSingleTrackRider16 kun oldin
  • Very nice work

    Guy PattsGuy Patts17 kun oldin
  • Good job 👏 👍

    بركات القرنيبركات القرني19 kun oldin
  • 1.5t. - rigging

    anthony Aanthony A19 kun oldin
  • Nicely done Sir. I vote electric would be awesome. Could you add drive motors too so it could drive aswell?

    Josh DeVriesJosh DeVries20 kun oldin
  • Did you go back and add more weld to those joints in your 1 inch plate, or did you leave 1/2" wide by 1/8" high MIG beads (!!) holding your beam to that 1 inch plate? no penetration... that thing is gonna fall down and kill someone, probably you.

    Railgap EsotericaRailgap Esoterica20 kun oldin
  • nice work, isn't it required by the state of NY to have it load tested certified. those over heads are specially heat treated. just saying. it requires the weight it can carry posted on the beam.

    Jim VetJim Vet21 kun oldin
  • I love watching Andrew. But this project concerned me. Then I read the comments to see if I was alone in my views. I wasn't. This isn't about the main beam capacity. It is about those welds from those fab'd plates under the trollies, as others have said. I thought I would have had the main beam flush between the two. There didn't seem to be room to be on top of them. Then have the trollies hold a fab'd carriage under the main beam. But then use 7018 rod penetrating into proper bevels & beam and filled using all the passes needed. That beam alone, (cringing) with no load on it, would do horrific damage to anything under it. So, is it me or does the side beams being smaller obviate the size of the main beam? I can't tell if they are. And do they already carry a live load from the roof? If you brought a heavy load toward either end and to either side beam's middle, their full moment mid-span, then their capacity may then become the critical strength. But what a cool shop to have. Almost like heaven. I think you should submit this to an SE to evaluate capacity. Probably cost no more than $500 for a non-stamped consult..

    ummagowaummagowa22 kun oldin
    • Everything is fine, this will never break. Mig welds are stronger.

      Andrew CamarataAndrew Camarata22 kun oldin
  • I think there should have been a third beam for it to sit on as there was a fair amount of bounce and it should be more rigid.

    Mr FlukeyMr Flukey24 kun oldin
  • Andrew 30 days later: So I just got in the electric, remote controlled winches (plural) and the remote controlled beam movers for the north/south ends of the winch beam.... Cody and me will get them installed in the next vid!

    Jason StarrJason Starr25 kun oldin
  • Another great project every man wishes he could do

    Dawson 1111Dawson 111127 kun oldin
  • Andrew will probably motorize the hoist as soon as he discovers servo's.

    KizzKizz28 kun oldin
  • Andrew! You can hang the hand-driven hoist in series with the electric. Hang it underneath if you need accuracy. Just a thought. And is your wife picking out the music for you? That's great music. Are you picking it or is she. Kudos to whoever is doing it. Great job.

    Alex TAlex T28 kun oldin
  • Brilliant job 👏

    my surly truckermy surly trucker29 kun oldin
  • OSHA has had an influx of its regulators come in for PTSD counseling after watching this video.

    Joeziah BabbJoeziah BabbOy oldin
  • 24:40 he farts

    Reeo ThecReeo ThecOy oldin
  • 11:44 Call it what you want but damn I don't think I've ever seen a burr that big you have to use a cold chisel to remove it.

    Adamant AdamAdamant AdamOy oldin
  • Always a fan of folks DOING for themselves, not always a fan of doing BY themselves.

    Michael ThompsonMichael ThompsonOy oldin
  • Looks good to me, I learn alot watching your channel and I am an engineer. I became one because as a automotive technician I hated half the designs they did; They don't really designed for maintenance or repair. Engineers fail to realize that our customer is not only the consumer but the technicians. The only concern I would state as a weak link would be the welds. The connection of any load bearing member is always a top concern in design because its a high stress riser due to small cross sectional area. Welds also fail, quit frequently due to crack growth around the heat affected zone. Penetration is also another consideration. Only recommendation I would give would be to bevel the plates prior to welding to get more penetration. For what your lifting you should be good, just don't go crazy. Love your videos, keep them coming! Cheers.

    Jamel SmithJamel SmithOy oldin
  • Never seen a I-bean circlar saw like this before. It goes through metal like it's normal wood! Wow!

    Colbert PhilippeColbert PhilippeOy oldin
  • Why not cut out a T in those plates and slide them on the end of the beam. That things scares the crap out of me as is.

    David AndersonDavid AndersonOy oldin
  • The thing about Andrew is this ...half the fun of life is making and doing it yourself.. the guy has plenty of energy and it never does to waste...life is good.

    Terry TenleyTerry TenleyOy oldin
  • 24:39 the fart made it perfect :D

    Jori VainioJori VainioOy oldin
  • Tudo de bom a você,Andrew Cmarata,ai é outro nivel ferramantas de 1° mundo a multi prosseso MILLER É SHOW 👍👍👍

    Ilcinei JoseIlcinei JoseOy oldin
  • 26:54

    R UR UOy oldin
    • 28:18

      R UR UOy oldin
  • Andrew is unstoppable.

    Denis RenaudDenis RenaudOy oldin
  • This person is so unique and talented. I haven't seen anyone that can compare to him. Just can't stop watching him at work.

    LunitaLunitaOy oldin
  • I’d say the capacity is no greater than 4t, since the trolleys at the end of the moving beam is 2t each, and you doubled them up. It may be further limited based on the weld of the plate to the beam- where that weld didn’t seem to be beveled?

    Joe GrayJoe GrayOy oldin
    • Alex T No worries- I think we are on the same page. Personally I would not want to mess around with weld joints loaded like that and holding an overhead weight. I probably would have had the steel plate cut on a water jet with an I beam shape that allows the beam’s flange to sit on the plate- the end shape would look vary similar to what Andrew made by fabrication with the gussets, but skipping on the welding.

      Joe GrayJoe Gray28 kun oldin
    • @Joe Gray No. Not sarcastic. Sorry if it sounded that way. I like Andrew's work, but sometimes I have questions as to what he's doing. No biggy. Trying to be funny, I think. The theme in all of Andrew's work seems to be to get it done. He certainly knows more about all this than I do. But comments were coming fast and thick about how it could fail and I was scratching my head also. I'd have preferred a different approach to supporting all that weight.

      Alex TAlex T28 kun oldin
    • Alex T I assume you are being sarcastic- I’m not shitting on Andrew’s work- the work he performs is outstanding. But all things have a rated capacity, and he asked what our opinion was based on the size of the steel beams- I’m telling you it would not be the beams that limit the capacity.

      Joe GrayJoe Gray28 kun oldin
    • Yeah, I agree. That thing couldn't pick up a tuna fish sandwich. Forget a meatball hero. No way. I hope it works though. He's doing his best.

      Alex TAlex T28 kun oldin
  • Only as strong as the weakest link ...your welds maybe...1-1/2" thick I beam pre heat to 200 degrees backing plates either 5/32 7018 or.068 flux core. all beads tied in.. one big flux core feeder bead as wide as my thumb

    Hutch0WorksHutch0WorksOy oldin
    • Beams would bend well before a one of the welds would fail.

      Andrew CamarataAndrew CamarataOy oldin
  • Hope that steelbars didn't fall down.

    azime osman @ saimonazime osman @ saimonOy oldin
  • Personally, I would have done all of the welding and painting on the ground. Of course, I also would have cut the sawhorse in half, at least once. As far as the amount of weight goes... ...I'm accustomed to getting stuck with the grade school dropouts that the boss could get away with paying crap. And the type of boss I'm accustomed to is worst. So, even If it were my own place I'd still have to admit to myself that I really don't trust anyone with more than a 2 1/2 ton chain fall. I therefore would leave that thing at 2 1/2 tons until somebody broke the chainfall, .... again. Then, I would probably conclude that I shouldn't have wasted the money on over 1 1/2 ton. Sometimes steelworkers just have too much experience for their own good, for me it's all the time. Anybody I could considered a "master" is also somebody who got seriously injured. ....and, believe it or not..."The system" in New York State is so screwed up that you can't trust anyone. The NYS run workmans compensation "insurance" courts ACTUALLY WANT THE EMPLOYERS TO BLAME ACCIDENTS ON THE EMPLOYEES and the unemployment "insurances" we all have taken out of our paychecks ARE NOT ACTUALLY INSURANCES EITHER. "The State" will not let you collect "THEIR MONEY" unless you first sign a waiver that it is YOUR FAULT! So, you are working at the only job you can find and you hear about accidents...by looking at the broken tools. And that is what broken men look like. Your boss has a right to break them and all that is left is broken ladders and missing eye bolts. Someone knew what happened and decided to leave it broken...as a note about who you can trust. (Regardless of what the guys robbing the till over at The New York State offices may think, I watched how he flipped over and then PULLED on that beam and decided that I'd rather not wait for the new guy to show me what the cure for it is. You can't subject your body to either motion for long without falling or bottoming out your spinal cord.) So, when you are working on a job and somebody else "wants your job"...what you have to remember is that you are working with the sorts of people who got thrown out of grade school. If somebody decides he feels like dropping a brick on you head there isn't any such thing as a State government who is going to prove it is his fault...bosses included.

    Joe NicoteraJoe NicoteraOy oldin
  • 14:03 OSHA approved techniques lol

    dpsilverdpsilverOy oldin
  • How much did that bit cost?

    John KennedyJohn KennedyOy oldin
  • It must have felt wonderful to have that new capacity and versatility in the shop! Sweet! :)

    art mckayart mckayOy oldin
  • 24:49 that's what she said

    SteveVi0lenceSteveVi0lenceOy oldin
  • I look forward to seeing Andrews videos. Great vid like all the rest. It's awesome when Harbor Freight Equipment makes a showing in the vids....

    Chuck LehmanChuck LehmanOy oldin
  • Totally impressed! Great vid.

    Roger FRoger FOy oldin
  • Cutting T slot should be better right?

    John Neil BiberaJohn Neil BiberaOy oldin
  • Nice great job done 👍

    Gurudan SinghGurudan SinghOy oldin
  • where did that old dog go?

    omgdntdieomgdntdieOy oldin
  • Nn

    Jerry MchaleJerry MchaleOy oldin
  • clamp a guide to that plasma for a straighter cut. wondered how long it would be before you did lol. i was like FINALLY!!!

    maiden englandmaiden englandOy oldin
  • Well, you have skills and tools, the rest of us have to pay someone else to do it! ;) Nice job. I need a much smaller version of that in my small shop for just engines and car frames.

    Rick NeighborsRick NeighborsOy oldin
  • With the taxes we pay in NY, a dollar saved is $3 you'd have to earn.

    joe hopesjoe hopesOy oldin
  • This world is lacking good men like you. I've away been a hands on man, in fact the best advice I got was if you working a corporate job always so somethings mechanic or a trade.

    Jeremy RaynerJeremy RaynerOy oldin
  • Really impressive you doing it all by yourself 💯

    Heberto trejoHeberto trejoOy oldin
  • I would like to know the h beem steel cutter milwauke what model or type pls info

    NcepNcepOy oldin
  • Go to a carpet store to see if they have samples to throw away so you can put one down under the mag drill to catch excess cutting fluid and you don't have a mess on the floor. Check construction sites for throw away also.

    Chris GuiceChris GuiceOy oldin
  • Man u got some expensive tools,,one he'll of a house shop

    Raymond QuaveRaymond QuaveOy oldin
  • I think it's amazing no matter how many times I see this. He does this kind of thing alone.

    Dada IroDada IroOy oldin
  • Excellent job Andrew.

    mike beaumontmike beaumontOy oldin
  • The weakest part of that assembly is probably the plates holding the trollies to the crossbeam. I think proper spec is to notch out the profile of the I-beam, fillet the edges, slide the brackets onto the I-beam, and then weld them on. I'd be curious to know how well those welds penetrated.

    SpecTRe XSpecTRe XOy oldin
  • No Bump stops on the cross beam

    soph flosoph floOy oldin
  • The yellow carriage is NO Way Wide enough it will torque off before long

    soph flosoph floOy oldin
  • Bloody Dangerous

    soph flosoph floOy oldin
  • Curious as to why you didn’t cut out the wide flange shape out of your plate then you wouldn’t of needed to make gussets back the web also it would hold itself in place without just hoist up to the trolleys and bolt it up and weld your plate out, cool set up I like how simple it is

    KC 135KC 135Oy oldin
  • One man army

    Khalid MahmoodKhalid MahmoodOy oldin
  • 👍

    Frederic FredFrederic FredOy oldin
  • Hello you are a welder , locksmith

    Frederic FredFrederic FredOy oldin
  • Jason couldn't be more right!! Downhill welds on 1" plate with MIG???? ANY structural weld HAS to be uphill to be safe, downhill MIG welds are just one long cold lap weld (especially on thick plate) and should NEVER be trusted to bear any amount of weight!!!!!! They are more like hot glue just sticking to the surface of the steel and NOT penetrating it AT ALL. If you value your life you should redo those welds!!! If a MIG machine is all you have at least use flux cored wire and weld FROM BOTTOM TO TOP!!! AFTER grinding out those useless welds (and remove all mill scale)! You should really take a welding course at a local community college, and if you did the teacher should be fired. This coming from a professional certified structural welder with thirty-five years of experience. I'm NOT exaggerating, your life could be seriously in danger, welds like those fail all the time.

    Mike KlassMike KlassOy oldin
    • Mike Klass it’s penetrated all the way. This will never break.

      Andrew CamarataAndrew CamarataOy oldin
  • That’s awesome Andrew. And you did this dangerous work all by yourself. Have you thought about when, god forbid, you hurt yourself and you can’t get to your phone, how do you get help?

    Hamid BashiriHamid BashiriOy oldin
  • I keep wondering why he cut off the section of I beam that leads into the loft. He could have totally used his hoist to put heavy stuff in the loft....

    Shawn GreenShawn GreenOy oldin
  • Now all ya need is an Electric Hoist ... Chain Fall is great but I'd have an Electric Hoist for sure!!

    ron dillron dillOy oldin
  • Dude you should’ve stick weld or flux core it. Hard Wire was a bad choice. I am worried a bit about your safety under that thing.

    Andrey ShatinkinAndrey ShatinkinOy oldin
  • More than 10 tons, obviously the chain will fail first, then the central trolley. So overbuilt and safe.

    Aitor BledaAitor BledaOy oldin
  • excellent video Top Marks. You will be a most sort after programmer shortly keep the good work.

    Lynn StewartLynn StewartOy oldin
  • 9:10 that pop

    Saul AldanaSaul AldanaOy oldin
  • i used a 25 ton trolley crane for 16 years building truck scales/train scales/floor scales ....................

    John barfneckJohn barfneckOy oldin
  • well done, can't imagine all of this alone (the dog also have helped I noted). Congrats

    Edson EugenioEdson EugenioOy oldin
  • Why not use the plasma in lieu of the saw?

    Frank GuerreroFrank GuerreroOy oldin
  • السلام عليكم ورحمه الله وبركاته اخي العزيز استمتعنا وستفدنا بمشاهدة هذا العمل الجميل الذي يدل على خبرة ومهاره في العمل استمر بنشر كل ما هو مفيد نتمنى لك التوفيق

    جاسم محمدجاسم محمدOy oldin
  • Paint the hook YELLOW, so you don't whack your head on it.

    Ernest SilvaErnest SilvaOy oldin
  • That ain't goin' nowhere. Where? Nowhere!!🤗😃

    Ernest SilvaErnest SilvaOy oldin
  • I would like to have been there to help. Great job on SAFETY. HARD HAT even though no O.S.H.A. around.😁 Nice having the right equipment.

    Ernest SilvaErnest SilvaOy oldin
  • What the hell is that saw.....

    Charlie DrummondCharlie DrummondOy oldin
  • 24:40 did u just fart ??????

    Hamid HABOUDOUHamid HABOUDOUOy oldin
  • I'll take "Things that are sketchy as fook" for 500 please Bob!

    ArmedlegallyArmedlegallyOy oldin
UZworld